Arduino Nano RP2040 Connect
Arduino
Specifications
| MCU | RP2040 |
|---|---|
| Core | Dual-core Arm Cortex-M0+ |
| Clock | 133 MHz |
| Flash | 16 MB external NOR flash |
| RAM | 264 KB on-chip SRAM |
| Wireless | WiFi, BLE |
| USB | Micro-USB |
| Logic voltage | 3.3 V |
| GPIO | 20 |
| ADC | 8 |
| PWM | 20 (except A6, A7) |
| Interfaces | I2C, SPI, UART |
| Form factor | Nano |
| Dimensions | 45 mm × 18 mm |
| Ecosystems | Arduino, MicroPython |
Resources
Shields
Sources
- docs.arduino.cc / hardware/nano-rp2040-connect
- docs.arduino.cc / …/datasheets/ABX00053-datasheet.pdf
- docs.arduino.cc / …/pinouts/ABX00053-full-pinout.pdf
- docs.arduino.cc / …/schematics/ABX00053-schematics.pdf
- docs.arduino.cc / …/nano-rp2040-connect/rp2040-ble-device-to-device
- store.arduino.cc / products/arduino-nano-rp2040-connect